How To Remove Print From Cotton Shirt

Download Article

Download Article

There are a few reasons you might want to remove printed designs or lettering from an item of clothing. Maybe you love the piece of article of clothing, merely don't like the printing. Perhaps the printing is getting old and doesn't expect good anymore, so you lot merely want to get rid of it, or replace it with something else. Either way, with the help of an iron or a household solvent, you will be able to remove common kinds of prints such equally vinyl or rubber.

1. 1

   Put the detail of clothing on a apartment surface to iron it. Place the clothing on a surface that is safe to iron on. An ironing board or hard table of some kind is best.^[1]

   • You lot could utilise the floor if you don't accept whatever other surface to iron on. Just be conscientious with a hot iron effectually carpeting.
   • This method works to remove vinyl or rubber prints that were heat transferred to the clothing in the first place.

2. two

   Place a dry out towel inside the clothing underneath the press. Fold a towel up so it fits within of the piece of clothing and beneath all of the printing that you lot want to remove. This will protect the other side of the clothing from the heat of the iron.^[2]

   • If you don't have a spare towel handy, you could also use an onetime t-shirt or annihilation else that is soft and not decumbent to impairment by heat.

   Advert

3. 3

   Put a wet material on tiptop of the press. Soak a hand towel or clean cloth in cold running water. Wring out the excess water and then information technology is non dripping and place the textile flat over the print you desire to remove.^[3]

   • The moisture material volition create a protective layer betwixt the iron and the printing so it doesn't cook onto the fe.

4. iv

   Place a hot iron on top of the wet fabric over the press. Printing the hot iron against the moisture cloth over the first part of the impress that you desire to remove. Utilize gentle force per unit area with your hand to be sure the heat reaches the impress.^[4]

   • If the atomic number 26 is the heavy old-fashioned kind, then you can just let it sit on top of the press and the weight should be enough on its own.

5. 5

   Remove the iron when the wet material is dry beneath the iron. Listen to the sound of the h2o fizzing and evaporating on the wet textile under the iron. The material will be dry when you don't hear the water bubbling anymore. Lift the iron up and set it aside when that role of the cloth is dry.^[5]

   • If you leave the iron on too long after the moisture cloth stops fizzing, it could burn.

6. 6

   Apply a knife to loosen the printing and pry it off. Carefully scrape off the print with the abrupt border of a pocketknife. Use your fingers to assist peel information technology off when you accept loosened information technology with the knife.^{[half dozen]}

   • Exist careful to e'er scrape away from you with the knife to avoid cutting yourself.
   • Endeavour to use the knife to just loosen the edges of the printing, so peel every bit much equally you lot can off with your fingers to avoid damaging the fabric below with the knife.

7. vii

   Repeat the process until all the printing is gone. Moisture the cloth again if information technology is dry after you peel off the starting time section of print. Apply the hot atomic number 26 over the wet material for the remaining printing, then scrape and pare it off until you are happy with the results.^[7]

   • You may have to get over sections several times, depending how stuck on the printing is.

Advertizing

1. 1

   Get a solvent similar rubbing alcohol, nail polish remover, or adhesive remover. These are common solvents y'all will exist able to find in your house or at a convenience store. Go a bottle that has enough liquid in it to soak the whole area of the clothing that y'all want to remove printing from.

   • Yous can likewise look for special heat transfer vinyl remover that is designed to take vinyl lettering off of clothing.
   • Solvents only work to remove vinyl and rubber prints from wear. Screen printed ink is permanent on clothes.

2. 2

   Test the solvent on a hidden area of your clothing to run into if it causes damage. Turn the clothing inside out or find an area that doesn't show when you habiliment it. Pour a drop or 2 of the solvent you are going to utilise onto the subconscious surface area, and wait to see if it discolors or damages the fabric in any manner.

   • If the clothing looks fine afterwards you pour the solvent on, so information technology is safe to proceed. If non, then you should find another solvent to apply and so you don't ruin your clothing.
   • Don't use solvents on delicate fabrics such as rayon, wool, or silk.

3. 3

   Turn the clothing inside out so the backside of the press is facing y'all. You want to exist able to soak the textile behind the printing in lodge to take it off the front end. Place the inside-out particular of clothing on a flat surface in forepart of you.^[viii]

   • Information technology would probably be easiest to sit or stand at a table or counter as you lot remove the printing.

4. 4

   Cascade the solvent onto the part of the wearable where the printing is. Pour out enough solvent to soak the entire back part of the fabric behind the print y'all want to remove. Wearable a facemask if the solvent fumes bother yous.^[nine]

   • Make sure that you are working over a surface that volition be easy to clean up if you accidentally spill whatsoever solvent.
   • Stretching the fabric out then that the solvent can soak in completely can make the procedure easier. Just brand sure not to stretch the clothing so much that y'all damage or distort it.

5. 5

   Turn the clothing dorsum correct side out and peel or scrape off the printing. Flip the clothing back so that the printing is facing outwards. Try to peel off the print with your fingers or scrape it off with the sharp border of a knife.^[ten]

   • Be careful when you use a knife and always scrape away from you.
   • You tin wear latex gloves if you don't want to go the solvent on your fingers and hands.

6. half-dozen

   Repeat the process until you have peeled off all the printing. Go as much print off as you can by peeling and scraping. Flip the clothing inside out again and pour on more solvent when you tin can't get anymore off, and and so try to peel and scrape the remaining print off again until information technology is all gone.^[11]

   • If you can't get information technology all off with a solvent, then you can try using the oestrus from an iron to loosen the press.

7. seven

   Wash the wear every bit yous normally would to remove the solvent. Follow the garment'due south care instructions to wash information technology safely. This will go rid of whatsoever harsh chemical smells and your wear will be ready to wear once more!^[12]

   • If in that location is any glue rest or stickiness left where the print used to exist later yous wash the habiliment, and so try an adhesive remover to get the residue off.

Advertisement

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertising

Video

Thanks for submitting a tip for review!

About This Commodity

Article Summary X

To remove the print from your item of clothing, get-go past placing it on an ironing board. Then, fold a dry towel inside the vesture so it's directly underneath the impress you lot want to remove. You should as well place a wet material or hand towel on elevation of the print to finish it melting onto the iron. Once your iron has heated up, press it gently against the wet cloth and hold it there until the water stops bubbling or fizzing. When the cloth has dried out, advisedly scrape off the impress with the abrupt edge of a knife. If you can't remove the whole print the start time round, wet your cloth again and repeat the process until the impress is all gone. Alternatively, utilise a solvent, similar rubbing alcohol, nail polish remover, or adhesive remover, to the dorsum side of your impress before scraping information technology off with a knife. For more tips, including how to test a solvent on your clothing to make sure it doesn't cause impairment, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 598,814 times.

Did this article aid yous?

Source: https://www.wikihow.com/Remove-Prints-from-Clothes

Share this post